cookieBanner.title
cookieBanner.description
cookieBanner.description
Perfect for any setup
The versatile SDA-2400 stereo power amplifier features both analogue and digital inputs, as well as a range of novel features to deliver outstanding performance in a wide range of applications.
It includes both optical and coaxial digital inputs in addition to the traditional balanced and single-ended analogue inputs, in order to fit any possible setup. This power amplifier can function in a traditional stereo or multichannel setup – but also as a powerful addition to single standing media players and streaming devices with integrated volume control. Using the digital connections, there will be no interference or noise from external sources.
The digital inputs are based upon the Wolfson WM8804 PLL Transceiver for excellent dynamic performance and improved tolerance to clock jitter.
Smart power
The SDA-2400 will automatically go into stand-by mode when not in use. When the amplifier detects a signal, it will turn on automatically. You can set it to always be on – and if your connected device has a 12V trigger output, this can control the power state of the SDA-2400, and even daisy-chain several SDA-2400 amplifiers.
Based on the latest technology of MOSFETs, the generation of heat inside the SDA-2400 is much less than comparable amplifiers – both in max load situations and, more importantly, in idle situations where an amplifier typically spends most of its lifetime.
Digital amplification
Lyngdorf is the pioneer in digital amplifiers, and the SDA-2400 power amplifier is not your typical Class D power amplifier. It’s better. It has very low and linear distortion and an impressive signal-to-noise ratio, making it the perfect choice for those seeking the purest sounding high-power amplifier on the market.
The output stage uses Pulse Width Modulation with a patented switch speed optimization technology. Together with a fixed switching speed of 390 kHz and minimal feedback control, this ensures low and linear distortion compared to typical Class D amplifiers.
productPage.contactUsForBuying
"In the listening test, the Lyngdorf SDA-2400 was a real surprise! For a power amp in this price class, it’s absolutely outstanding how the music flow was kept. There’s not much of the usual hardening of the sound which I heard very often from other Class-D solutions. The SDA-2400 is a Class-D stereo power amp with musical glaze."
"2 x 200 Watt into 8 Ohm and 2 x 400 Watt into 4 Ohm is enough power for almost any loudspeaker. But the main point here is that this power amp is very stable. Even 2 Ohm is unlikely to become a problem. I’ve connected some really critical loudspeakers and never had any doubts about this."
"Conclusion: Versatile and strong in sound. A price-beater."
Frank Borowski, lowbeats.de
"The Lyngdorf MP-50 processor and SDA-2400 amplifiers have performance that matches the best sound quality heard in my room so far. But add RoomPerfect to the equation, and the Lyngdorf products move to the top of the pile."
Widescreen REVIEW
Description:
Integrated stereo amplifier
Power Handling:
2 x 400 W @ 4O hm, 2 x 200 W @ 8 Ohm
Frequency range:
0.3 Hz - 31 kHz (-3 dB points, 4 Ohms load)
Distortion:
0.004% (1 W / 8 Ohms, A-wgt.)
Maximum output current per channel:
±40 A
Signal/noise:
117 dB (200 W / 8 Ohms, A-wgt.)
Damping factor:
266 (8 Ohms, @100 Hz)
Other audio specifications:
Channel separation: 96 dB (1 kHz, 200 W/8 Ohms) | Internal delay: 0.6 ms/0.0 ms (digital/analog input)
Inputs:
Analog: 1 x Single Ended RCA, 1 x Balanced XLR | Digital: 1 x Coaxial S/PDIF (≤192kHz / 24 bit), 1 x Optical S/PDIF (≤96kHz / 24 bit), * All inputs has signal detection
Outputs:
2 x 2 acoustic screw terminals
Other interfaces:
1 x Trigger 12V Input, 1 x Trigger 12V Output for daisy chain
Placement:
Rack mount or freestanding
Dimensions (W x H x D):
450 х 73 х 360 mm
Weight:
6.5 kg
Finish:
Anodized aluminum, matte black
