cookieBanner.title
cookieBanner.description
cookieBanner.description
For large home cinemas
With experience in creating speakers for Steinway Lyngdorf reference home theatres, especially the outstanding Steinway & Sons LS models, combined with our experience from the Lyngdorf MH and FR speakers, our engineers have developed the LS-1000 for Lyngdorf Audio systems. Four LS-1000 modules combined create a line source speaker, with each module consisting of four 115 mm midrange drivers with light aluminium cones, 25 mm voice coils and powerful vented magnets, complemented by eight 1” soft dome tweeters. Four LS-1000 modules combined result in a line array with 16 midrange drivers and 32 tweeters.
Dedicated LS models for left, right and centre placement
Depending on the room width, seat layout, speaker position and screen size, three different LS-1000 models have been designed for the best sound dispersion into the room:
Reduced floor and ceiling reflections and uniform sound energy across the room
The LS-1000 consists of multiple identical drivers in a vertical line source array. Compared to conventional point-source speakers, a line source minimizes the effect of floor and ceiling reflections by restricting the vertical sound dispersion. Listeners will hear more of the speaker and less of the room. The LS-1000 also retains its sound energy across the room, the perceived volume level is very uniform on every seat. The “sweet spot” opens-up in all directions significantly.
Very rigid and shallow modular construction, easy to install
The LS-1000 is a very rigid modular construction which minimizes mechanical resonance. The overall cabinet design is slim and very shallow, which makes it very easy to install behind acoustically transparent screens. The stacked modules connect through integrated contact pins, so that no external speaker cables are required between the modules.
Easy to combine with amplifiers
With an IEC power handling of 300 watt, sensitivity of 98 dB 2.83 V/1m, and a combined impedance of 4 ohms when using four modules, the LS-1000 is easy to combine with amplifiers. The high sensitivity combined with a line source’s typically uniform sound energy across the room allows the LS-1000 to achieve very high volume levels while sounding very effortless with the given amplifier power. The frequency range of 20,000Hz down to 100Hz allows different woofers or subwoofers to complement the LS-1000 seamlessly, ideally with the Lyngdorf BW-20.
productPage.contactUsForBuying
"The LS-1000 has a very special sound beam compared to conventional speakers. A line source radiates less sound energy above and below listening axis. The SPL in this area drops by 10 dB, which means less reflections from the ceiling and the floor and a more direct sound. Additionally, I designed the left and right LS-1000 with a crossover filter so that the sound beams inwards. Therefore, you don’t have to toe them in. The sound is ideally directed towards the audience, with less reflection from the sidewalls."
Henrik Green Mortensen, Senior Acoustics Designer Lyngdorf Audio
Description:
2-way in-wall line source loudspeaker system
Power Handling:
300 W (IEC) (for four LS-1000 modules)
Frequency range:
100 – 20.000 Hz (-3 dB) (for four LS-1000 modules), extension down to 50 Hz depending on EQ
Sensitivity:
98 dB (2.83 V/1 m) (for four LS-1000 modules)
Maximum SPL:
120 dB (for four LS-1000 modules)
Tweeter:
8 pcs 1” soft dome
Midrange/woofer:
4 pcs 115 mm, 25mm voice coil, aluminum cone, vented magnet
Crossover point:
1800 Hz
Nominal impedance:
16 Ohm (line source consisting of four LS-1000 modules: 4 Ohm)
Inputs:
Screw terminals
Enclosure:
Closed, MDF
Placement:
In-wall
Dimensions (W x H x D):
280 x 500 x 85 mm + mounting (Left, Right) / 280 x 500 x 132 mm + mounting (Center)
Weight:
9.9 kg (Left, Right) / 10.4 kg (Center)
Finish:
Matte black
